Category Archives: Cleanroom Cleaning

Blue Thunder General Topics Cleanroom Cleaning

Decoding Chemical Contamination in Cleanrooms

Blue Thunder General Topics Cleanroom Cleaning Education

EU GMP Annex 1 2023 Updates

Blue Thunder General Topics Cleanroom Cleaning

Contamination Control in the Food Industry

Cleaning a cleanroom needs to be done with great precision. Check out this guide to learn how to clean a cleanroom.

Clearly, when it comes to maintaining a cleanroom, cleaning is kind of important. There are strict protocols to follow to ensure that the cleanroom remains just that โ€“ a totally sanitized space that is suitable for its purpose.

Asย cleanrooms classifications rangeย from ISO Class 3 to ISO Class 7, and cleanrooms can be used for a range of purposes, specific requirements will vary.

Read on for our guide to the essentials of cleanroom cleaning.

Before beginning to clean your cleanroom, youโ€™ll need to suit up.

That means putting on a cleanroom suit, which consists of a white coverall. This is usually one piece, and incorporate overshoes and a hood. They are designed to ensure that no skin cells or hair are shed in a controlled environment.

Given thatย 80% of contaminationย in a cleanroom comes from people, you can see why even when cleaning, suiting up is important.

Powder-free glovesย are also a must.

Make sure that you bring have the following supplies to hand:

  • Non-lintingย cleanroom wipes
  • Cleanroom mops
  • Specialistย trash bags
  • Swabs
  • HEPA filterย vacuum
  • Detergents
  • Disinfectants

Each cleanroom will have its own specific protocols that dictate the cleaning detergents and disinfectants that can be used, and how frequently they should be cleaned.

The first stage is to clean the room thoroughly with detergent, before disinfecting.

Cleaning the Walls

Begin the cleaning by cleaning the walls. Take a dedicated, cleanroom mop and bucket with the detergent solution already prepared.

Carefully wet the mop. Starting in the furthermost corner away from the door, place the mop in the top right-hand corner and bring it down the wall in a straight, even stroke.

Continue in overlapping strokes along the wall. Take care not to allow the mop to touch the floor. If it comes into contact with the floor, replace the mop head and continue.

Rewet the mop approximately every two meters.

Alternative methods include using horizontal strokes, or vertical to the half-way point, and horizontal for the lower portion. This prevents the transfer of dirt from the lower to the upper parts of the walls.

Cleaning the Floor

Again, begin in the corner furthest from the door.

Charge the mop with disinfectant. As for the walls, use overlapping, straight line strokes to cover the area of the floor. Continue mopping the whole room, rewetting the mop about every square meter.

Work your way back towards the entryway, and do not step on any parts that have been mopped. The S Curve method can also be used instead of place and pull.

The Bottom Line: How to Clean a Cleanroom

Cleaning a cleanroom requires suiting up, assembling the right equipment and supplies ahead of time and following strict protocols that even govern how you mop the floors and walls.

Following these will ensure that the room remains sanitized and fit for purpose.

At Blue Thunder Technologies, we're a premier supplier of products for controlled environments. If you're running a cleanroom, we have everything you need to keep it up to standard.

Latest Cleanroom Cleaning Posts

The Importance of Global Standardization for Cleanroom Industry

Standardizing the cleanroom industry so that a uniformly defined set of requirements and properties can[...]

Stainless Steel in Cleanrooms โ€“ What You Need to Know

Stainless steel equipment and furniture are often used in cleanroom environments because it can meet[...]

Clean Room Grade ABCD Explained

If you do business in Europe and are installing a clean room that deals with[...]

Tips for Choosing ESD Flooring

Selecting ESD cleanroom flooring requires understanding your operational and installation properties, along with ESD electrical[...]

Common Characteristics of a Cleanroom Swab

How To Choose the Right Cleanroom Swab One of the cleanroomโ€™s most essential consumables are[...]

Cleanroom Face Masks and How to Wear One

A cleanroom environment is extremely sensitive to contamination regardless of the precautions taken to ensure[...]

Cleanroom vs. Controlled Environment

Often cleanroom and controlled environment designations are used interchangeably to refer to the necessary environment[...]

Soldering and De-soldering Process for PCBs

Soldering is a process that joins together two or more items (usually metal) by melting,[...]

Contamination Control in Pharmaceutical Cleanrooms

Contamination control in pharmaceutical clean rooms is driven by various technologies and disciplines like engineering[...]

To provide a better shopping experience, our website uses cookies. Continuing use of the site implies consent.