Category Archives: Cleanroom Cleaning

Blue Thunder General Topics Cleanroom Cleaning

Decoding Chemical Contamination in Cleanrooms

Blue Thunder General Topics Cleanroom Cleaning Education

EU GMP Annex 1 2023 Updates

Blue Thunder General Topics Cleanroom Cleaning

Contamination Control in the Food Industry

Cleaning a cleanroom needs to be done with great precision. Check out this guide to learn how to clean a cleanroom.

Clearly, when it comes to maintaining a cleanroom, cleaning is kind of important. There are strict protocols to follow to ensure that the cleanroom remains just that – a totally sanitized space that is suitable for its purpose.

As cleanrooms classifications range from ISO Class 3 to ISO Class 7, and cleanrooms can be used for a range of purposes, specific requirements will vary.

Read on for our guide to the essentials of cleanroom cleaning.

Before beginning to clean your cleanroom, you’ll need to suit up.

That means putting on a cleanroom suit, which consists of a white coverall. This is usually one piece, and incorporate overshoes and a hood. They are designed to ensure that no skin cells or hair are shed in a controlled environment.

Given that 80% of contamination in a cleanroom comes from people, you can see why even when cleaning, suiting up is important.

Powder-free gloves are also a must.

Make sure that you bring have the following supplies to hand:

Each cleanroom will have its own specific protocols that dictate the cleaning detergents and disinfectants that can be used, and how frequently they should be cleaned.

The first stage is to clean the room thoroughly with detergent, before disinfecting.

Cleaning the Walls

Begin the cleaning by cleaning the walls. Take a dedicated, cleanroom mop and bucket with the detergent solution already prepared.

Carefully wet the mop. Starting in the furthermost corner away from the door, place the mop in the top right-hand corner and bring it down the wall in a straight, even stroke.

Continue in overlapping strokes along the wall. Take care not to allow the mop to touch the floor. If it comes into contact with the floor, replace the mop head and continue.

Rewet the mop approximately every two meters.

Alternative methods include using horizontal strokes, or vertical to the half-way point, and horizontal for the lower portion. This prevents the transfer of dirt from the lower to the upper parts of the walls.

Cleaning the Floor

Again, begin in the corner furthest from the door.

Charge the mop with disinfectant. As for the walls, use overlapping, straight line strokes to cover the area of the floor. Continue mopping the whole room, rewetting the mop about every square meter.

Work your way back towards the entryway, and do not step on any parts that have been mopped. The S Curve method can also be used instead of place and pull.

The Bottom Line: How to Clean a Cleanroom

Cleaning a cleanroom requires suiting up, assembling the right equipment and supplies ahead of time and following strict protocols that even govern how you mop the floors and walls.

Following these will ensure that the room remains sanitized and fit for purpose.

At Blue Thunder Technologies, we're a premier supplier of products for controlled environments. If you're running a cleanroom, we have everything you need to keep it up to standard.

Latest Cleanroom Cleaning Posts

Cleanroom Clothing Requirements and Selection Guide

Minimum Garment Recommendations by ISO Class ISO 8 / Class 100,00 ISO 7 / Class[...]

A Wipe That’s Entirely Lint-Free?

Question: Where can I buy lint-free wipes? Answer: 100% lint-free wipes do not exist. This[...]

The Anatomy of a Cleanroom Wipe

  Wipers for Class 1 – Class 10 Controlled Environments: Sealed-edges (including thermal, laser, ultrasonic)[...]

What is the ideal placement for a cleanroom sticky mat?

Cleanroom tip: What is the ideal placement for a cleanroom tacky/sticky mat? Cleanroom sticky mats should be[...]

Cleanroom Class Requirements for USP800

This cleanroom tip comes from questions about the cleanroom class requirements for meeting and maintaining[...]

Know Your Cleanroom Wipe Materials

A variety of factors can influence the cleanliness of a wipe. From raw material to[...]

Resource List: Best Practices for Handling Hazardous Drugs in Healthcare Settings

In addition to the requirements of Chapters USP-797 & USP-800, the following documents (or their[...]

Recommended Cleanroom Validation Frequency to Meet ISO 14644-1:2015

ISO 14644-1:2015 classifies air cleanliness for airborne particle population levels (ranging from 0,1 µm to 5[...]

Cleanroom Classification for Aseptic Processing

Cleanroom Classification Recommendations for Aseptic Processing / Sterile Environments: Critical Area – ISO 5 (Class[...]

To provide a better shopping experience, our website uses cookies. Continuing use of the site implies consent.