ACL Staticide 380 Resistivity Meter

  • Accuracy: +/- 0.25 decade in the dissipative range
  • Power Supply: 9-volt alkaline battery
  • Test Voltage: 10-volts at values less than 106
  • 100-volts at values of 106 and greater
  • Resistivity Limits: 103 – 1012 ohms per square
  • Resistance Limits (when using external probes) 103 – 1012 ohms
  • LED Colors: Green 103 – 105
  • Yellow 3 x 105 – 109
  • Orange 3 x 109 – 1010
  • Red 1011 – 1012
  • Weight: 8.9 ounces
  • Size: 5 ¼” x 1 ⅜” x 3

This item is discontinued.


Out of stock

  • Tax Exempt? Add your sales tax exemption certificate at checkout
  • Over 20 years as an Industry Leader
  • Customer satisfaction guaranteed

ACL Staticide® 380 Resistivity Meter, with carrying case. All ACL Static Detection Meters are warranted one year from date of purchase on parts and labor. Calibration is recommended every 12 months.

The ACL 380 Resistivity Meter is a lightweight tester for measuring surface resistivity in ohms per square according to parallel resistivity probe method ASTM D257.

Easy to use, this meter shows values through an LED scale that is coded with colors to signify conductive, dissipative, and insulative. There is also a colored “warning” stage to signal to the auditor that the material is at the higher end of the dissipative range and is close to being out of specification. Half decades provide greater accuracy by giving a closer indication to the measurement value.

This meter is designed to be used in all facets of material production including engineering, maintenance, quality control, incoming inspection, manufacturing, research, and sales departments for the testing of antistatic mats, floor finishes, paints, wrist straps, smocks, footwear, bags and containers.

The ACL 380 Resistivity Meter and the ACL 381 Accessory Kit combine to make a dependable audit kit for conductive and dissipative surfaces. It is suitable for point-to-point (RTT) and resistance-to-ground (RTG) tests. When the 5-lb probes are used, this audit kit will comply with IEC 61340-4-1, ANSI/ESDA S4.1 & ANSI/ESDA S7.1.


Weight1 lbs