Category Archives: Cleanroom Cleaning

Blue Thunder General Topics Cleanroom Cleaning Education

Understanding and Managing Microbial Sessile States in Cleanrooms

Blue Thunder General Topics Cleanroom Cleaning

Decoding Chemical Contamination in Cleanrooms

Cleaning a cleanroom needs to be done with great precision. Check out this guide to learn how to clean a cleanroom.

Clearly, when it comes to maintaining a cleanroom, cleaning is kind of important. There are strict protocols to follow to ensure that the cleanroom remains just that – a totally sanitized space that is suitable for its purpose.

As cleanrooms classifications range from ISO Class 3 to ISO Class 7, and cleanrooms can be used for a range of purposes, specific requirements will vary.

Read on for our guide to the essentials of cleanroom cleaning.

Before beginning to clean your cleanroom, you’ll need to suit up.

That means putting on a cleanroom suit, which consists of a white coverall. This is usually one piece, and incorporate overshoes and a hood. They are designed to ensure that no skin cells or hair are shed in a controlled environment.

Given that 80% of contamination in a cleanroom comes from people, you can see why even when cleaning, suiting up is important.

Powder-free gloves are also a must.

Make sure that you bring have the following supplies to hand:

Each cleanroom will have its own specific protocols that dictate the cleaning detergents and disinfectants that can be used, and how frequently they should be cleaned.

The first stage is to clean the room thoroughly with detergent, before disinfecting.

Cleaning the Walls

Begin the cleaning by cleaning the walls. Take a dedicated, cleanroom mop and bucket with the detergent solution already prepared.

Carefully wet the mop. Starting in the furthermost corner away from the door, place the mop in the top right-hand corner and bring it down the wall in a straight, even stroke.

Continue in overlapping strokes along the wall. Take care not to allow the mop to touch the floor. If it comes into contact with the floor, replace the mop head and continue.

Rewet the mop approximately every two meters.

Alternative methods include using horizontal strokes, or vertical to the half-way point, and horizontal for the lower portion. This prevents the transfer of dirt from the lower to the upper parts of the walls.

Cleaning the Floor

Again, begin in the corner furthest from the door.

Charge the mop with disinfectant. As for the walls, use overlapping, straight line strokes to cover the area of the floor. Continue mopping the whole room, rewetting the mop about every square meter.

Work your way back towards the entryway, and do not step on any parts that have been mopped. The S Curve method can also be used instead of place and pull.

The Bottom Line: How to Clean a Cleanroom

Cleaning a cleanroom requires suiting up, assembling the right equipment and supplies ahead of time and following strict protocols that even govern how you mop the floors and walls.

Following these will ensure that the room remains sanitized and fit for purpose.

At Blue Thunder Technologies, we're a premier supplier of products for controlled environments. If you're running a cleanroom, we have everything you need to keep it up to standard.

Latest Cleanroom Cleaning Posts

Everything You Need To Know About Cleanroom Glove Length

How To Measure Glove Size: Learning About Cleanroom Glove Length When it comes the glove[...]

Surprising Ways Industries Are Using Clean Rooms

From nanotechnology to biological safety, clean rooms are used by many different industries for all[...]

An Introduction into SMS Material

In the industry of cleaning and contamination control, it’s vital that we use materials that[...]

Cleanroom Cleaning: Proper Surface Technique for Wiping Windows

Windows are among the most essential parts of a well-maintained cleanroom. Here are tips for[...]

Cleanroom Standards: An Overview

In today’s booming technological scene, cleanrooms are no longer a thing of mystery. For many,[...]

The Deepest Kind of Clean: Learning the Different Types of Sterilization

There are a lot of spaces in a society that must be kept immaculately clean.[...]

USP 800 New Release Date and Important Facts

Do you work in healthcare or occupational safety and health? If so, you should absolutely[...]

Products for Controlling Foreign Object Debris (FOD)

When strict product integrity is a manufacturing priority, as it is in the aerospace industry,[...]

Overview of Revised ANSI/ISEA 105 Standard

Video transcript: The standards are changing. Here’s what you need to know.. The advancement from[...]